svs

Fume Cupboard Technical Data Sheet SVS-1

Fixed fume cupboard designed manufactured and installed to BS 7258 Parts 1-4. For use in industry, research, higher education and healthcare

Standard colours; grey, white. non stock colours to order.

We are able to offer various material specifications to suit the specific needs of the user.

i.e.; epoxy panels, 316 stainless steel, welded polypropylene and UPVC.

Special cupboards for column use or walk-in can be designed to clients exact needs.



Standard Specification

Exterior Epoxy coated ‘Zintecsheet’steel with shaped front fascia incorporating secondary air inlet above sash and low level air inlet below removable stainless steel sill.
Interior 6mm white solid grade laminate having silicone sealed joints with removable back baffles.
Workbase Dished solid epoxy resin with cutouts for sinks or drip cups as required.
Sash

6mm frameless toughened glass hung on stainless steel Cables over nylon ballraced pulleys with single counter­ balance weight. Sash fitted with full length profiled handle with rise set to stop at 500mm working height.

Services

2 twin 13amp socket outlets.

Switched fused spur for twin fluorescent luminaire.

Airflow monitor with airflow failure and sash high alarms.

Water and dry services side mounted panel valves to suit user requirements complete with flexible inlet pipes.

Supported by

Fixed storage cupboards.
Options Epoxy coated mild steel tableframe, push-under storage, ventilated storage kit, panelling to ceiling.

svs
STANDARD STOCK SIZES AND TYPICAL CONNECTIONS FROM DUCT TRANSFORMATION OUTLET.

 

Transformation outlet not included with fume cupboard unless stated.

 

Model SVS/12 1200mm, wide @ min 0.5m/s = 250mm dia’ connection.
  @ min 0.6m/s = 315mm dia’ connection.
Model SVS/15 1500mm, wide @ min 0.5m/s = 315mm dia’ connection.
  @ min 0.6m/s = 315mm dia’ connection.
Model SVS/18 1800mm. wide @ min 0.5m/s = 350mm dia’ connection.
  @ min 0.6m/s = 350mm dia’ connection.
Model SVS/20 2000mm, wide @ min 0.5m/s = 350mm dia’ connection.
  @ min 0.6m/s = 400mm dia’ connection.

 

All cupboards can be fitted with fume wash unit or absolute filters for additional personnel and environmental protection with link up air make-up and or energy management systems.

 

INSTALLATION SERVICES AVAILABLE; EXTRACT SYSTEMS, PLUMBING, CONTROL WIRING AIR MAKE-UP SYSTEMS AND ASSOCIATED BUILDING WORKS.


Close window